Replace a snapped vertical blind slat hanger by unclipping the broken one and fitting a new universal hanger in minutes.
RB-01Identify the hanger typeLook at the small plastic clip at the top of the slat where it hooks into the carrier on the headrail. Note whether it has a single hook, a pin, or a slotted top, as vertical blind hangers vary slightly between makes. Most DIY shops sell a universal pack that fits the common types.
RB-02Buy replacement hangersGet a pack of universal vertical blind slat hangers rather than just one, since they are cheap and you may find others close to failing. Take the broken one with you or a photo if you are unsure it will match.
RB-03Lower and access the slatTilt the slats fully open using the wand or chain so the broken slat hangs straight. Gently unhook the bottom chain link connecting the slats if it is in the way, so the damaged slat swings free.
RB-04Remove the broken hangerSlide the slat down slightly to release the broken hanger from the carrier clip on the headrail. Unclip or unhook the broken hanger from the top of the slat itself, taking care not to crack the slat further.
RB-05Fit the new hanger to the slatPush or clip the new hanger onto the top of the slat, matching the fitting to how the old one was attached. Make sure it clicks or seats fully so it will not pull off under normal use.
RB-06Clip the slat back into the carrierHook the new hanger into the carrier on the headrail, pushing up until it clicks into place. Check it swings and tilts the same as the slats either side of it.
RB-07Reconnect the bottom chainIf you unhooked the bottom chain earlier, clip it back onto the weight or connector at the base of the repaired slat. This keeps the slats hanging evenly and stops them swinging in draughts.
RB-08Test and tidy upRun the blind fully open and closed a few times to check the repaired slat moves smoothly with the others. Bin the broken hanger and keep any spare replacements in a drawer for next time.
Some links may earn us a small commission at no extra cost to you.