Measuring, marking and setting out guides — HomeGraft

8 guides · Back to categories

MEASURING, MARKING AND SETTING OUT · 7 STEPSFinding the centre of a wall or panelLearn to find and mark the true centre of any wall or panel accurately, using measuring and diagonal methods.

MEASURING, MARKING AND SETTING OUT · 8 STEPSHow to read a tape measureLearn to read a tape measure accurately in millimetres so every cut and fit starts from a true number.

MEASURING, MARKING AND SETTING OUT · 7 STEPSMarking a cut line that stays accurateLearn to mark a straight, accurate cut line using a tape, pencil and square before you ever pick up a saw.

MEASURING, MARKING AND SETTING OUT · 7 STEPSMeasuring twice: the checks that stop mistakesLearn to measure and mark accurately so every cut, fixing and layout starts from a trustworthy number.

MEASURING, MARKING AND SETTING OUT · 7 STEPSSetting out with a laser levelLearn to use a self-levelling laser level to mark accurate, dead-level reference lines before any DIY job.

MEASURING, MARKING AND SETTING OUT · 7 STEPSSquaring up with the 3-4-5 methodLearn the 3-4-5 method to check or mark a perfect right angle using just a tape measure.

MEASURING, MARKING AND SETTING OUT · 7 STEPSTransferring a line from ceiling to floorLearn to mark a point on the floor that sits exactly below a point on the ceiling, using a plumb bob.

MEASURING, MARKING AND SETTING OUT · 7 STEPSUsing a spirit level properlyLearn to read a spirit level correctly and trust the result, not just glance at it.